To be absolutely safe... depend on Hanco International. |
Hanco manufactures a full line of washers and dryers to meet your special needs. We also carry a full line of electronic, tumble-style washers with various capabilities manufactured and engineered for long lasting industrial applications.
Automated Washers for Rubber Goods
Our washing machines have been engineered to clean rubber goods, especially the extra long line hose. With a single door on the top of the cabinet, and a dual door access to the drum, loading line hose has never been easier. The large 46” x 46” blankets are also easier to load into the machine. Dual rinse cycles are standard on all washers.
Line Hose Washers
Increase your productivity by eliminating diffcult manual labor. This unit scrubs the inside of line hose in less than 3 minutes!
Rubber Goods Dryers
A full line of sizes and applications to meet your specific requirements.
Hanco manufactures dedicated rubber goods dryers as well as carrying electronic tumble style dryers manufactured and engineered for long-lasting industrial applications.
- Hanco manufactures dryers dedicated to gloves and sleeves in open or enclosed cabinets.
- Models can dry 16, 32 or 48 gloves/sleeves in the open style or 12, or 50 gloves/sleeves, or 54 combined items in the enclosed models.
- The glove/sleeve dryers contain built-in thermostatically controlled heating elements and air blowers which force heated air into the glove to assure fingertip drying.
- Programmable microprocessor controlled tumble dryers are also available in 50 lb., 75 lb., and 120 lb. capacities for all rubber goods.
- Microprocessor controlled
- Simple start/stop controls
- Available in two sizes: 24” diameter drum (AW824) or 30” diameter drum (AW830)
- Standard 7 ft. long drum will accommodate the largest of line hose
- Heavy gauge, all stainless steel tank and drum construction
- Automatic wash and rinse cycles
- For washing: hoses, hoods, blankets, gloves, sleeves, cover-ups and jumpers (disassembled)
Requirements:
- 230 volts, 60/50 hertz, 3 phase with ground, 30 amps
- Level concrete floor (recommended)
- Water line with minimum of 60 psi
- Floor drain
Size:
- Model AW824: 11’-0”W x 3’-0”D x 3’-6”H (Drawing)
- Model AW830: 11’-0”W x 3’-0”D x 3’-6”H (Drawing)
Weight:
- Model AW824: 2,400 lbs. net weight
- Model AW830: 2,900 lbs. net weight
Capacity:
- Model AW824: 150 lbs.
- Model AW830: 200 lbs.
- Scrubs inside of line hose in less than 3 minutes
- Eliminates difficult manual labor
- Dramatically increased productivity
- Quickly pays for itself in labor/time savings
- Extended reach to scrub all lengths of line hose
- Fast brush changes with NO TOOLS REQUIRED
- Self contained unit can be mounted on a table
- Four brush sizes can clean all diameters of line hose
- Three brushes of your choice included with washer
Specifications:
- GFCI protected for operator safety
- Illuminated on/off switch with circuit breaker
- 14 gauge stainless steel construction for corrosion resistance
- Heavy duty nickel-plated bearing for maximum durability
- 137 RPM brush speed
- 120 volt, 50/60 hertz, single phase, 8 amps
- Weight: 120 lbs.
Brushes for Hanco Model LHW4 Line Hose Washer*:
- Small: for 1” and 1 ¼” I.D. line hose
- Medium: for 1 ½” I.D. line hose
- Large: for 2” I.D. line hose
- Extra Large: for 2 ½” I.D. line hose
- Includes brush welded to new shaft
*When ordering new brushes, specify small, medium, large or extra large.
Hanco’s automated dryers have been engineered to dry rubber goods, especially the extra long line hose. The racks are configured to allow maximum airflow around the rubber goods. With the Digital Control System, the machine is simple to operate. The door interlock system will turn off heaters when the doors are opened. The exhaust fan will continue to operate after the doors are open to prevent hot air from spilling into the room.
Features (Dependent on Model):
- Digital temperature control system
- Simple start and stop controls
- Easy to adjust digital time and temperature settings
- Capabilities of 50 gloves/sleeves, 50 hoses/hoods, 12 blankets, cover-ups and jumpers
- Standard 8 ft. long cabinet will accommodate the largest of line hose
- Dual door cabinet with Lexan windows
- Heavy gauge stainless steel and steel construction
- Glove holders mounted on side walls to eliminate bending and reaching
- Automatic shut-off cycle with thermal protection
Requirements:
- 240 volts, 60/50 hertz, single phase with ground, 60 amps
- Level concrete floor (recommended)
- 14” exhaust duct
- 18” of clearance on either side of dryer
 |
We do not recommend the use of consumer laundry products (i.e. Tide, All, Ivory Snow, etc.) for cleaning insulated rubber protective equipment.
All consumer laundry detergents are designed to clean with abrasive surfacants. Fabrics are cleaned by gently being scrubbed with the abrasive surfactant to remove dirt and stains from the fiber. They do this well, but as a result of this scrubbing action lint is produced, which is fiber torn form fabric.
The same action takes place on the surface of natural rubber goods.
Rubber gloves are treated by the manufacturers with a chlorinated process which seals the pores of the natural rubber and results in sleek, shiny finishes.
By using a powdered laundry detergent, this seal is gradually, abrasively scrubbed off which opens the pores in the natural rubber and creates a tacky or sticky feeling on the surface of the rubber.
This same action will take place in the field due to rubbing the exposed areas of the gauntlet as well as by the protectors themselves, which will abrade the rubber by moving against it while working.
Premature degradation in the lab can be eliminated by using a liquid rubber cleaner which is designed and formulated to clean by dissolving dirt instead of scrubbing it from surfaces.
Damage created in the field, which is a normal result of usage, can be repaired in the lab by using silicon beads which dissolve in the final rinse cycle of the wash and re-seal any open pores in the natural rubber. The result is that the equipment maintains a sleek and shiny surface as well as enjoying an extended product life cycle.
We offer both products to assist you in these matters.
Formula 515
Available in:
- Box of (4) one gallon jugs (40 lbs.)
- Five gallon pails (47 lbs.)
- 55 gallon drums (540 lbs.)
Formula 516
Available in:
- 10 lb. 2 gallon pails (12 lbs.)
- 30 lb. 6 gallon pails (33 lbs.)
MSDS Sheets
- Formula 515 Liquid Cleaner
- Formula 516 Conditioning Coating Beads
- 3M PF-5060 Performance Fluid
